P1.95 Rental LED Display – Yuncang Series by InspurLED

High-precision die-cast cabinets, 3840–7680Hz refresh, front/rear maintenance, and curved installation—ideal for stage rental and live events.

LED Display Terminal

Product Features

• Standard Sizes (500×500mm / 500×1000mm): Uses international die-cast aluminum cabinets with high precision for seamless splicing and smooth visual performance.
• Lightweight & Easy to Install: Slim design with quick-lock structure enables fast setup, breakdown, and transport—ideal for stage rental and event use.
• 3840Hz High Refresh Rate: Ultra-smooth visuals with flicker-free performance, perfect for live broadcasts, concerts, and indoor/outdoor events.
• Adjustable Arc Design: Flexible panel edges support inner and outer curved installations for creative stage layouts and immersive display effects.
• Dual Maintenance Access: Modules support both front and rear maintenance, and the central control box is detachable for fast service and repairs.
• Broadcast-Grade Grayscale: Delivers rich image depth and fine color gradation for premium viewing in HD and 4K formats.
• Multiple Installation Options: Compatible with ground stacking, hanging/hoisting systems, and pedestal mounting for various rental stage environments.

Product Specifications

Model	LC1.9 NT
Module	Pixel Structure	SMD 3-in-1
	Pixel Pitch (mm)	1.95
	Module Resolution (W×H)	128×128
	Module Size (W×H) (mm)	250×250×15
	Pixel Density (dot/m²)	262144
Cabinet	Unit Module Composition	2×2
	Unit Resolution (W×H)	256×256
	Unit Size (W×H×D) (Mm)	500×500×81.5（& 500×1000×81.5）
	Unit Weight (kg)	6.5±0.5
	Maintenance Method	Front and back maintenance
	Protection Level	IP30
	Cabinet Material	Die-cast aluminum
	Flatness	≤0.1mm
Optical Parameters	Brightness (cd/㎡)	800
	Color Temperature (K)	6500(adjustable from 2000K to 9300K)
	Visual Angle	160° horizontal / 160° vertical
	Brightness/Chroma Uniformity	≥98%
	Contrast Ratio	5000:1
Electrical Parameters	Peak Power Consumption (W/㎡)	≤500
	Average Power Consumption (W/㎡)	≤160
	Power Supply Requirements	AC100 to 240V (50-60Hz)
Driving Method	Driving Method	Constant current drive 1/8 sweep
	Frame Change Frequency	50/60Hz
	Refresh Rate (Hz)	3840-7680.
	Brightness Control	16384
	Processing Depth (bits)	14-16
	Brightness Control	Manual/automatic/programmed
Usage Parameters	Lifespan Typical Value(h)	≥100000
	Operating Temperature/Humidity Range	–10℃–45℃ / 10%-80%RH (no-condensing)
	Storage Temperature/Humidity	-20℃–55℃/  10%-85%RH (no-condensing)

Precautions

1. Cleaning Guidelines
Use a soft brush to gently clean the surface of the LED module.
⚠️ Do not use any liquids or chemical cleaners, as they may damage the LED lamp beads.

2. Moisture Protection & Storage

Store the product in a dry environment below 30°C temperature and 60% humidity after opening.

If the screen has not been used for over 3 days, follow these steps:
 • Preheat at 30–50% brightness for 4–8 hours
 • Then switch to normal brightness (80–100%) to fully light up the screen.

If unused for more than 7 days, extend preheating:
 • Preheat at 30–50% brightness for at least 12 hours
 • Then adjust to 80–100% brightness as normal.

This step helps remove internal moisture and ensures stable, safe operation.

Note:

1. The listed specifications are typical values based on standard production. Actual performance may vary slightly between batches. For accurate and certified data, please refer to the official factory inspection report provided with the product.
2. Our LED display modules are continuously improved and updated during manufacturing. Product specifications may change without prior notice. Please check with your regional distributor or sales representative for the latest information before placing an order.
3. For custom LED display solutions, including non-standard configurations or special technical requirements, a revised product specification sheet will be issued accordingly.